Originally posted by majek_maniac
View Post
468x80 Banner
Collapse
Announcement
Collapse
No announcement yet.
SLP Toll Bridge
Collapse
X
-
I have been kind of hoping that I blew a head gasket. Monte came by and we yanked the head off and started looking for weak spots in the gasket itself. Pulled everything off cleaned it all up really good and permatexed the whole thing in hopes that the easiest fix possible was the problem. I've got to wait 24 hours for the permatex to cure and then I'll fire and run the motor off of the dog ears and see if that was the problem. If not, then I have bigger issues. Ya'll keep your fingers crossed for me. Thanks for the help FlatoutFishin!Last edited by 007; February 17, 2009, 03:56 PM.I work just enough to pay for my fishing habit.
-
If this doesn't work Coe, then I know what the problem is. There was a chip on the outer wall of the top cylinder that was about a 1/4 of an inch from the inside edge of the upper cylinder which could have been the breach spot. If that is the problem, I might need one of those uppers.Originally posted by WestEndAngler View PostFingers crossed!! Mike let me know if you need a good working upper there are still hundreds scattered around after Ike.I work just enough to pay for my fishing habit.
Comment
-
ZERO scarring on any of the inside walls. The outer sleeve is about 7/16" thick and there was a chip that got within 1/4" of the edge of the inside wall.Originally posted by WestEndAngler View PostDid you chip the liner on the inside of the head?I work just enough to pay for my fishing habit.
Comment
-
Michelle:
How do you get free pass on "Da Bridge"? JT asked me to ask."Hey Hillary, regarding the Benghazi Attack on 9/11-we'll just blame it on that movie, not my total lack of security. By the way, what's so significant about 9/11 anyway-was that a date my buddy Bill Ayers of the Weather Underground blew up a government building?" asked Obama to Hillary. BEAUTIFY AMERICA, RUN OVER A LIBERAL, THEN BACK UP AND SEE IF HE'S DEAD.
Comment
Comment