468x80 Banner
Collapse
Announcement
Collapse
No announcement yet.
Spun Prop and Prop-Aid
Collapse
X
-
We put wire cutters in the new boat too, after a bad run in with a submerged abandoned crab trap.
-
.....and it takes up a heck of a lot less room in a small flats boat with little storage.Originally posted by 007 View PostCall Louie and go pick one up! http://www.baumannprops.com/ Tell him that Dirt sent you.
It's not a fix all.....but it'll get you back to the ramp at full speed.
We changed the prop on a Suzuki 250 engine 110 miles offshore! Sure didn't want to drop that prop nut!!!
Leave a comment:
-
Call Louie and go pick one up! http://www.baumannprops.com/ Tell him that Dirt sent you.Originally posted by Oleander Kayaker View PostSo, how is this gizmo acquired? Are you taking orders Kenny?
It's not a fix all.....but it'll get you back to the ramp at full speed.
Leave a comment:
-
So, how is this gizmo acquired? Are you taking orders Kenny?Originally posted by kenny View PostThere was a post on TOB about someone spinning their prop between the jetties and being in harms way. Mike in Friendswood rescued them with a tow to the yacht basin.
Everyone should have a Prop-Aid. Ask Louie Baumann if they really work.
http://www.prop-aid.com/
Leave a comment:
-
My prop hubs last about a year..... so I now keep an extra on board, just for that reason ...... just spun one just last monht while I was in a rush
Leave a comment:
-
-
Originally posted by smooth movecarry a extra nut, washer and cotter pin also. don't even want to know why i know this.
Fumble into the drink maybe? Prop Nut off into the Big Blue tool box?Been there done that. LOL
Leave a comment:
-
humph, didnt think of that, that is an easy thing to put in the hatch with those things. Good heads up. Oh, and we always have some kind of silicone spray, corrosion type spray on board.
Originally posted by Randy View PostThrow a small 2X4 in your storage hatch to help remove the prop. A guy at the ramp sliced his hand open trying to break the old one loose. Bad Stuff!
I haven't had good dealings with those prop wrenches and carry a ratchet/socket.
Leave a comment:
-
x2. Prop Aid is good I have one on my boatOriginally posted by smooth movecarry a extra nut, washer and cotter pin also. don't even want to know why i know this.
Leave a comment:
-
Oh yeah, I keep water always on the boat, and I change it out every time it goes out. That was one excellent thing to be said. Thank you.
Leave a comment:
-
if the hub is to far gone like mine was once, you would have to put it in gear & to be safe,remove your lanyard.
x2 on a small 2x4, put it in a zip lock bag
Leave a comment:
-
Throw a small 2X4 in your storage hatch to help remove the prop. A guy at the ramp sliced his hand open trying to break the old one loose. Bad Stuff!
I haven't had good dealings with those prop wrenches and carry a ratchet/socket.
Leave a comment:
Leave a comment: