468x80 Banner
Collapse
Announcement
Collapse
No announcement yet.
lo-profile baitcasters
Collapse
X
-
World is different when you get in the water. You could make nearly any reel hold up if you didn't wade, and you babied it. If you are mechanically inclined and have a few minutes, a bottle of Reel X will make them all last longer. I got the Revo advice from a fulltime tournament guy, who is sponsored by them, and a reel repair guy who won't even work on them anymore. I'm glad that they work for you, and I'm not saying that my 2 cents is anything but my 2 cents.
Leave a comment:
-
im about to buy a shimano curado myself... do yall have any recommendations between the 200E5 and the 200E7 model. the 200E5 has a 5.0:1 gear ratio and the 200E7 model has a 5.0:7 gear ratio.... what gear ratio do yall recommend?
Leave a comment:
-
You're right, I don't get the wading thing. If you ever see me wading, you know my boat sunk.
Leave a comment:
-
I've had 0 problems with the three that I have Chip!...........and they all still have the original 50# power pro on them........as a matter of fact, the red on the Home Page was caught with my oldest one with a blood knot in the middle of the spool!Originally posted by imhammer View PostI have one and Mike had to rebuild it for me after 6 months of using it. I would buy the shimano any day over it. I guess I will have to try the Daiwa also.
Leave a comment:
-
dead on 2112.you going gigging burrrrr tonite...........i like shimano and use it.............. but 007 obama may force me to buy that h20 rig....How much are they?Originally posted by 2112 View PostCoach...a lot of Tx people wade fish and if you start getting into deep water you have to hold that sissy spinner higher out of the water to keep from donting that line twister.
Leave a comment:
-
I have one and Mike had to rebuild it for me after 6 months of using it. I would buy the shimano any day over it. I guess I will have to try the Daiwa also.Originally posted by 007 View PostTry this cheap arse H2o Mettle that I've fished with for the last 8 months and then get back to me. It blows my Curado BSF200 away in every which way but loose. I can throw a PinkSkitterwalk 80 yards down wind.........no problem!! Not sayin the Shimanos are bad at all (I own 2 of them) but these are more bang for the buck reels hands down.
Leave a comment:
-
Coach...a lot of Tx people wade fish and if you start getting into deep water you have to hold that sissy spinner higher out of the water to keep from donting that line twister.
Leave a comment:
-
Leave a comment:
-
Originally posted by dbarham View Postit's the 20th century bro
Acutally, it's the 21st century if you're really counting. That's why people should be using newer technology, which means using spinners. To each their own. I grew up making fun of baitcaster bass fishermen and I still do. It's strange to me that so many people use them here in Texas. You don't find it so prevalant anywhere else. I do find that baitcasters are better when drift fishing, because you've always got the wind at your back. I own 2 of them and don't know why. Now y'all go pick out your rats nests.
Leave a comment:
-
Try this cheap arse H2o Mettle that I've fished with for the last 8 months and then get back to me. It blows my Curado BSF200 away in every which way but loose. I can throw a PinkSkitterwalk 80 yards down wind.........no problem!! Not sayin the Shimanos are bad at all (I own 2 of them) but these are more bang for the buck reels hands down.Originally posted by shallowist View PostI'm going to give you some very well researched advice. I have used and serviced both Shimano and Daiwa. I would put my money on Daiwa any day. If you look at the bang for the buck models, which unfortunately are 150-170 these days. You could get a Curado (which is much improved) or a Team Daiwa Advantage. There's a touch more weight with the Daiwa but I would put money on it far outlasting and outcasting the Curado. Both are very low profile and comfortable to cast. At the meet and greet two weeks ago, I had this same discussion with Mike in Friendswood, long time reel repair guy. There are a lot of good reels, all will succumb to saltwater eventually, only Daiwa and Shimano have reasonable parts availability. Virtually every other reel maker uses some cheap pot metal parts somewhere in the reels that will eventually destroy every moving part. And for the skeptics, No, I'm no longer sponsored by Daiwa, but I still fish, and abuse them regularly. I probably fish 100 days a year currently, a few years back my Daiwa gear survived in excess of 250 days a year and customer abuse... Plus the occasional dunking from those days that I thought that I need two rods when wading.
Leave a comment:
-
I'm going to give you some very well researched advice. I have used and serviced both Shimano and Daiwa. I would put my money on Daiwa any day. If you look at the bang for the buck models, which unfortunately are 150-170 these days. You could get a Curado (which is much improved) or a Team Daiwa Advantage. There's a touch more weight with the Daiwa but I would put money on it far outlasting and outcasting the Curado. Both are very low profile and comfortable to cast. At the meet and greet two weeks ago, I had this same discussion with Mike in Friendswood, long time reel repair guy. There are a lot of good reels, all will succumb to saltwater eventually, only Daiwa and Shimano have reasonable parts availability. Virtually every other reel maker uses some cheap pot metal parts somewhere in the reels that will eventually destroy every moving part. And for the skeptics, No, I'm no longer sponsored by Daiwa, but I still fish, and abuse them regularly. I probably fish 100 days a year currently, a few years back my Daiwa gear survived in excess of 250 days a year and customer abuse... Plus the occasional dunking from those days that I thought that I need two rods when wading.
Leave a comment:
Leave a comment: