Fish Cleaning Table

[Astros13]

Im in between jobs right now and got some free time in my hands. Im wanting to build a fish cleanin station in my back yard with some pvc pipes going to the drain. I got a old cast iron sink laying in my garage that I want to put in it. Any tips, ideas, or some pics if yall have some would be helpful.
Thanks

[bubbas kenner]

build a sturdy wooden table and use a plastic trash can to hold garbage bag for guts forget pluming with a sink use a nossle on a water hose for cleaning.carry guts away to the bumbster its what I do.

[Reef Drifter]

ours at the beach house is a 6ft table with a single sink that the water hose hooks up to and we just throw the guts in a bucket then dig a hole and bury them ill see if i have a pic

[Astros13]

Thanks guys. I forgot to add I also do a lot of BBQing outside and will be using for that also.

[Reef Drifter]

Thanks guys. I forgot to add I also do a lot of BBQing outside and will be using for that also.

cut a peice of plexi glass to put on top when you are not using it to clean fish

[Astros13]

found this one http://www.2coolfishing.net/ttmbforu....php?p=3523711

[Ibtsoom]

I know Vjer built a really nice one for somebody on here but I cant find the thread. Shoot him a PM -- I bet he has some pics that might give you some ideas.

[buoy37]

Juv,

I have a treated wood plant table I built a few years ago out of 4x4s and 2x4s. You are more than welcome to it. I believe it is 8' x 4'. The slats can be removed and you can deck it with any material you desire. It will also have to be cut down a bit to be counter height. Let me know. It is currently in the Friendswood/Pearland area.

Let me know. It is yours if you want it.

[Gater]

Astro13 I built that one and it has a 1x6 Trex top which I found to be the best material.
It is inset in a 2x10 frame which is a little bigger than I normally use but because of the length
and the depth of the sink that is what it needed to be. You can get by with a 2x6 or 2x8 frame on a shorter
table. If you have any questions let me know.

Gater

[Tidalguide]

I bought a simple fold up table at home depot for $39. It is my fish cleaning, beer brewing, bbq prepping station.

[Robalo]

I used starboard for my top inside a nice wood frame with routed round edges, wood rails with cuts in them for water to drain-guts are thrown in the canal, hose, electric plug and spotlights are within 4 feet, so easy to clean and use 'lectric fillet knife. I believe it's 40" x 40" square. Big enough to clean most any fish. On 4x4 treated wood posts in my cement deck.

[Astros13]

Thanks everybody for the helpful tips. I been up and running all day today and haven't even started on it.

Bouy thanks for the table. I got some 2x4s and 2x6-8 left over from a previous project. If i need more wood or something ill call you. Thanks

Gater nice table design. I'm going to copy it but make it about 8ft. Hope it comes out good.