Just Finished Rigging Upgrade with Twin 250 Suzuki 4 Strokes

[evansmarine]

Just Finished installing a pair of 4 stroke 250 Suzuki's on a Dakota 36' Boat. Took for maiden voyage this afternoon and man I cant believe the power of the Suzuki's as well as how quite they run. We had to make new dash panel for gauges, remove the entire t-top to get all the rigging done man that was a mother ******, but now it's done and really impressed with the boat. I will post some pictures of the gauge bezel we built in a day or so.

[Robalo]

Yep, swapping out power/motors isn't easy or cheap. Looks nice Bryan.

[mjh]

Looks good.

[Shortystillsurfs]

Nice work. I wanna see the bezel.
How much did that cost the guy?

[TroutSupport]

Nice... uh...if you have to ask how much it is... uh... never mind

[Jhua]

Nice looking boat!

[Beandaddy]

Bout 40K if I was guessing. Looks first class to Me.
Beandaddy

[evansmarine]

We found a great deal on the Suzuki's they are 08's with Port engine 156hrs, and Starboard 155hrs. We got them cheap because the guy was re-powering to 350 Yamaha's so we got the pair and all the rigging for 15K. Way Cheap since new they go for 23K each. We De-Rigged and re-rigged for 2,500.00 so needless to say we have one happy customer, and it just sip's gas now. I ran it yesterday from Clear Lake to the end of the jetties and back about 4500RPM and used 9.6 Gal of fuel. Not bad considering the hull weighs 11,00lbs.

[Chongo]

We found a great deal on the Suzuki's they are 08's with Port engine 156hrs, and Starboard 155hrs. We got them cheap because the guy was re-powering to 350 Yamaha's so we got the pair and all the rigging for 15K. Way Cheap since new they go for 23K each. We De-Rigged and re-rigged for 2,500.00 so needless to say we have one happy customer, and it just sip's gas now. I ran it yesterday from Clear Lake to the end of the jetties and back about 4500RPM and used 9.6 Gal of fuel. Not bad considering the hull weighs 11,00lbs.

We are the ones that repowered him with the Yamaha's. You got one h*ll of a deal on them motors.

[Beandaddy]

How much for the Yammies? 35-40K each?
Beandaddy

[Chongo]

How much for the Yammies? 35-40K each?
Beandaddy

63K for the both of them + install

[evansmarine]

We are the ones that repowered him with the Yamaha's. You got one h*ll of a deal on them motors.

I want to thank you guy's for the beautiful DE-rig of the engines and rigging harness. You guy's know your stuff and would work next to y'all any day on a project. Def. Know your ****! If you guys ever need anything from me let me know, you guy's made my job go like butter. You wouldn't believe how many times I have gone behind someone crap they De-rigged and had hell.

[Chongo]

I want to thank you guy's for the beautiful DE-rig of the engines and rigging harness. You guy's know your stuff and would work next to y'all any day on a project. Def. Know your ****! If you guys ever need anything from me let me know, you guy's made my job go like butter. You wouldn't believe how many times I have gone behind someone crap they De-rigged and had hell.

I will make sure I pass this on to Greg. Yes he does know his ****. Our service department is one of the best around. I sell lots of boats because they are that good.