Marine plywood

[FISHINFREAK]

Slone in Santa Fe, or for sure Kemah hardware get your $$$$ out tho.

Thanks ill check Slone out

New posting on CL:

http://houston.craigslist.org/boa/3132312565.html

Could save you afew bucks!

I did some research and read that the poly resin is weak without glassing over it and i dont wanna glass lol im goin with a spar varnish thanks though

[FishNette]

New posting on CL:

http://houston.craigslist.org/boa/3132312565.html

Could save you afew bucks!

[FISHINFREAK]

I hear ya.I used 3/8" cheap stuf in my last one and it worked just fine and saved me some cash for other stuff. Its still holding up 5 yrs later for my friend that bougt my boat.Just saying. Post some pics when you get her finished. Good luck

Okay thanks man i definitely will post some.

If use use some kind of clear coat on the plywood, Keeping the water off the wood should Definitely make the wood last longer, Do the front,back & sides. Good Luck!

Yeah am im ganna use some stuff called Goldspar on all the wood. Thanks

[The Fisherman]

If use use some kind of clear coat on the plywood, Keeping the water off the wood should Definitely make the wood last longer, Do the front,back & sides. Good Luck!

[corndog]

I hear u to each his own man but im gonna put a floor though with as big as the ribs are and the fact my wife will be fishing here and there with me im for sure puttin one in thanks for the input though.

I hear ya.I used 3/8" cheap stuf in my last one and it worked just fine and saved me some cash for other stuff. Its still holding up 5 yrs later for my friend that bougt my boat.Just saying. Post some pics when you get her finished. Good luck

[FISHINFREAK]

Please dont take this the wrong way. I have owned several flatbottom tin cans and can speak from my experience. Dont spend a dime on plywood. Rip it all ot and run it bare floor.Your just adding wieght to a tin can. If you want somethin on the bottom buy a rubber coated floor mat from home depot.

I hear u to each his own man but im gonna put a floor though with as big as the ribs are and the fact my wife will be fishing here and there with me im for sure puttin one in thanks for the input though.

[corndog]

Please dont take this the wrong way. I have owned several flatbottom tin cans and can speak from my experience. Dont spend a dime on plywood. Rip it all out and run it bare floor.Your just adding weight to a tin can. If you want something on the bottom buy a rubber coated floor mat from home depot.

[FISHINFREAK]

OH guess I just made that Shite up!? Your saying regular treated plywood and marine grade plywood are exactly the same???
You been building boats for 65 years like my old man? -- he started when he was 14 building trawlers out of cypress with a hand saw a hand drill and a steam drum. He may know a little something. What would the world be without Google?
If you'll call kemah hardware and ask them, they sell about 4 different grades of treated pylons and plywood -- each step up is and increased percentage of whatever chemical they use to keep that stuff from degrading these days. and yes I agree -- salt water doesn't rot wood but untreated wood lasts no time when submerged because there's all kinds of critters that eat it -- I've seen worms eat the whole bottom out of boats and off of pylons. (yea I know -- not the case in a boat floor but if it were me I wouldn't go the cheap route)

Fishinfreak -- good luck to ya man -- i was just trying to be helpful.

I appreciate it alot man! I decided im gonna do marine plywood on the floor and just go with regular plywood that ill coat everywhere else(front and back deck) seeing how the floor to me is the most important and would be the more time consuming to replace again . Kemah hardware was very helpful they also suggesting some sealant thats marine grade i think is call Goldspar that im also gonna pick up. But anyways thanks.

[Ibtsoom]

Treated wood should work fine for redecking. Save the extra expense and buy some fishing gear or something else you want or need. If you use marine grade plywood, you will need to epoxy coat it. It is bare/natural, not treated to a higher pressure or more concentrated chemicals(where did that info come from?). That's a lot of extra work. You can use the preassure treated as-is. Good luck with your project! Post pics!

BTW - Saltwater does NOT rot wood.

OH guess I just made that Shite up!? Your saying regular treated plywood and marine grade plywood are exactly the same???
You been building boats for 65 years like my old man? -- he started when he was 14 building trawlers out of cypress with a hand saw a hand drill and a steam drum. He may know a little something. What would the world be without Google?
If you'll call kemah hardware and ask them, they sell about 4 different grades of treated pylons and plywood -- each step up is and increased percentage of whatever chemical they use to keep that stuff from degrading these days. and yes I agree -- salt water doesn't rot wood but untreated wood lasts no time when submerged because there's all kinds of critters that eat it -- I've seen worms eat the whole bottom out of boats and off of pylons. (yea I know -- not the case in a boat floor but if it were me I wouldn't go the cheap route)

Fishinfreak -- good luck to ya man -- i was just trying to be helpful.

[FISHINFREAK]

X2.. I have always been told that as well.

Yessir

[03Marine]

I also just read that the copper( wat they started putting in when they could use arsenic) in treated sheets isnt good for aluminum that it causes oxidization

X2.. I have always been told that as well.

[03Marine]

X2.... I have always been told that as well

[FISHINFREAK]

i don't know about his boat, but in about 2 hours, i'll be 3 sheets in the wind.

Hahahahaha

[FISHINFREAK]

How many sheet are in it now ?

They have one on the floor and all the rest looked like they took scraps screwed them down then carpeted. 4 sheets is wat i will need but no the whole 4 sheets wont be used i only need about 3 1/2 but i cant but half sheets. Now if i do my floor like it is now and leave the gaps on the sides ill only need need 3 sheets (2 1/2) lol.

[FishNette]

That sounds like the best idea. Regular ply with polyester resin coating. I think I'd go with that to avoid the copper issue.