468x80 Banner

**mikey01** · April 20, 2012, 10:25 AM

Originally posted by WestEndAngler View Post

How do you get magnets to stick on Aluminum or Galvanized?

i got 2 powder coated pces of plate 5" X 5" and bolted to trailer. works great.

**2112** · June 20, 2012, 01:51 AM

In my experience this intermitent working lights are due to bad grounds. You just have to be willing to find it.

**FlatoutFishin** · June 20, 2012, 02:41 AM

PVC guide lights in LED will reduce your problems by 200%...if you have sound wiring!

Attached Files

**EZ-E** · June 20, 2012, 08:22 AM

i switched to the LED lights & grounded the lights to the trialer instead of trying to use the ball & tounge as a ground & that fixed my issues.

**kenny** · June 21, 2012, 05:37 AM

All my wiring connections are inserted into 1 1/2" pieces of PVC filled with silicone. That and another direct ground to the truck works for me. I'm not going to stop and take my lights off & put 'em back on every time I launch!

**FlatoutFishin** · June 21, 2012, 09:00 AM

Originally posted by kenny View Post

All my wiring connections are inserted into 1 1/2" pieces of PVC filled with silicone. That and another direct ground to the truck works for me. I'm not going to stop and take my lights off & put 'em back on every time I launch!

I did the same but on the metal square tubing that I ran the wires down from the lights...I also got under the truck and secured one end of a 14 guage wire to truck, with an alligator clip on the other...I just clip it to whatever I'm hualing for exra precaution....I too have been burned by the man. Ironically, when he pulled me over pre new leds...my lights really were working when I left the driveway!(for once)

**evansmarine** · June 21, 2012, 12:20 PM

We took care of him with new LED system a month or so ago.

**evansmarine** · June 21, 2012, 04:14 PM

DUH.........

**Dawg** · June 21, 2012, 04:38 PM

Dang, I was just going to post another suggestion for him. Glad you got him fixed up Bryan.

**FlatoutFishin** · June 21, 2012, 09:11 PM

Originally posted by evansmarine View Post

We took care of him with new LED system a month or so ago.

It's never too late to learn something...like reading a thread completely!

**mjh** · June 21, 2012, 09:23 PM

Good luck with this issue and I hope you get it fixed!

**seafox owner** · July 4, 2012, 08:31 PM

Horizon Trailers off I45 in Galveston

**evansmarine** · July 5, 2012, 09:51 AM

Originally posted by seafox owner View Post

Horizon Trailers off I45 in Galveston

Kinda like this one. Didn't read entire tread, and thinks horizon trailer is still in business

468x80 Banner

Announcement

Darn Trailer Lights

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment