Tweet
Today, I pulled the prop off. I found a whole birds nest of grass/reeds right up against the prop shaft seal. I have heard this will do something bad to the seal?? I removed it all by the way.
-
Tight Lines
-
How hard is a reseal for someone with minimal mechanical experience? ThanksTight LinesComment
-
The seal kit is ordered.Tight LinesComment
-
Sorry about the delay guys, I need to order a service manual as I am at a standstill on this lower unit reseal.Tight LinesComment
-
Alright guys, I have good news and bad news. The good news is the fuel pump is good and not leaking now! (Pumped fuel through with no leaks anywhere) The bad news is that I can't find a way to get the driveshaft oil seal out, any suggestions? Also, I can't break the screws loose to split the bottom part of the gearcase. I have been soaking them in pb blaster and liquid wrench for about a week now. Also, my new head gasket should be here today so I can put the head back on!
The part number for the oil seal is #12 on the gear case group.
Tight LinesComment
Comment